Copyright 2004
Regal Plastics

 

 

 

 

Industrial Series True Union Ball Valves
3/8" to 4", PVC or Corzan® CPVC

Features 

 

Options 

  • Full Port Design
  • PTFE Seats
  • Double Stem Seals
  • Easy to Service
  • Threaded Seal Carrier
  • NSF Approved
  • Threaded Male End Connections
  • Electric Actuation
  • Pneumatic Actuation
  • Valve Safe Lockout

 

     

Rugged Construction: Cepex Industrial Series True Union Ball Valves are cost effective yet rugged enough to stand up to demanding industrial and commercial applications.
True Union Design:  This makes these valve very easy to maintain by allowing for easy removal from a piping system without breaking down piping connections.  Just unscrew the two assembly nuts and lift the valve body out of the line.
Advanced Design Features:  A special threaded seal retainer allows for the seat to be adjusted while maintaining downstream system pressure. Industrial Series True Union Ball Valves feature a double o-ring stem seal for twice the leakage protection of valves with only a single stem seal.
Never a Problem with Corrosion:  This is because of the valves all plastic construction.  They will never rust or corrode...and they can survive corrosive environments without the need for painting or expensive epoxy coatings.
Cost Effective Design:  Cepex True Union Ball Valves are the valves of choice for cost sensitive applications the require a full featured, no compromise valve.



Compact Series Ball Valves
1/2" to 4", White PVC

Features 

 

Options 

  • Full Port Design
  • Compact, Lightweight
  • EPDM Seals
  • Corrosion Free, All Plastic Construction
  • Maintenance Free With No Replaceable Internal Parts
  • Reliable Performance at a Cost Effective Price

 

  • Valve Safe Lockout

 

 

Quality Construction: Compact  Series True Union Ball Valves are designed for all light duty applications.
Compact Design:  These valves fit into places where other valves can't.  When space is at premium and a lightweight valve is needed the Compact Series from Cepex is the answer.
Never a Problem with Corrosion:  This is because of the valves all plastic construction.  They will never rust or corrode...and they can survive corrosive environments without the need for painting or expensive epoxy coatings.
Cost Effective Design:  Cepex Compact Series  Ball Valves are the valves of choice for light duty, cost sensitive applications in all applications.

 

True Union Ball Check Valves 1/2" to 4", PVC or Corzan® CPVC

Features 

 

Options 

  • Easy Installation and Maintenance
  • Silicone Free Construction
  • For Horizontal or Vertical Installation
  • 1/2" to 2" Rated to 240 PSI @ 70°F
  • 2 1/2" to 4" Rated to 150 PSI @ 70°F
  • Rugged, Cost Effective Design

 

  • Threaded PVC Male End Connectors
  • Foot Valve Screens

Backflow Prevention:  Cepex by Hayward True Union Ball Check Valves prevent reversal of flow in piping systems.  They are ideal where backflow could potentially cause damage to pumps, filters, or process equipment.
Automatic Operation:  The valves operate without the need for any adjustments or settings.  Line pressure moves the solid plastic ball off the elastomer seat, opening the valve.  When the inlet flow stops, back pressure (3.75 PSI minimum) moves the ball back onto the seat, stopping the flow.
True Union Design:  All sizes of valves  feature a true union design.  This allows for easy removal from a piping system without breaking down piping connections.  Just unscrew the two assembly nuts and lift the valve body out of the line. The system piping connections  never have to be broken down.
Cost Effective Design:  Cepex True Union Ball Check Valves are the valves of choice for cost sensitive applications the require a full featured, no compromise valve.
No Corrosion Failures:  Because of their all plastic construction, these valves will never jam or stick as a result of rust or corrosion.  Also they will not contaminate sensitive fluids that come into contact with them.


Butterfly Valves
Industrial and Standard Series 2" to 10", PVC Body and Disc

Features 

 

Options 

  • Ten Position Lever Handle
  • Handle Features Position Indication and Built In Stops
  • Low Operating Torque
  • Cost Effective Design
  • Choice of Viton® or EPDM Seals

 

  • Stem Extensions
  • Gear operators
  • Electric Actuation
  • Pneumatic Actuation

Application Versatility:  Cepex offers two types of high quality, cost effective butterfly valves for industrial and commercial applications, the Industrial Series and the Standard Series.  The Industrial Series Valves features a Type 316 Stainless Steel Shaft while the Standard Series has a Zinc Plated Steel Shaft.  The shaft on both types of valves is a non-wetted part, meaning that the process media never contacts it unless the seals fail. Critical applications that require the extra insurance that a Type 316 Stainless Steel Shaft gives use the Industrial Series Butterfly Valve while less critical applications can take advantage of the lower cost Standard Series.  Cepex by Hayward give you a choice...you never have to pay for more valve than your application requires or settle for less valve than you really need.
Valve Operators: The Industrial and Standard Series Valves both come standard with a manual lever operator.  The lever handle and top plate are constructed of plasticized aluminum for excellent corrosion resistance.  The handle features ten built in position stops and acts as a position indicator.  Aluminum gear operators are available for easy operation and they allow precise control of the process media for accurate flow  modulation.  Electric and pneumatic actuators are also available for manual remote control or computer/processor valve control.
No Corrosion:  These valves have no metal in contact with the process media.  They cannot corrode or rust, nor will they contaminate sensitive fluids flowing through them.
Cost Effective Design:  Cepex Industrial and Standard Series Butterfly Valves are the valves of choice for medium duty, cost sensitive applications in all industries.

 

Wafer Style Check Valves 4" to 8", PVC

Features 

  •  Low Pressure Drop Design
  • Compact, Light Weight
  • Easy Installation
  • No Flange Gaskets Need
  • Installs Between Two Standard Flanges
  • Rugged, Cost Effective Design

Backflow Prevention:  Cepex Wafer Check Valves prevent reversal of flow in piping systems.  They are ideal where backflow could potentially cause damage to pumps, filters, or process equipment.
Automatic Operation:  The valves operate without the need for any adjustments or settings.  Line pressure moves the solid plastic flap off the elastomer seat, opening the valve.  When the inlet flow stops, back pressure moves the flap back onto the seat, stopping the flow.
Low Pressure Drop Design:  Cepex Wafer Check Valves have been designed to provide excellent flow characteristics.  Because of their Straight Thru Flow Design they have a lower pressure drop then other check valve designs. And their compact size takes up less space in the pipeline than other type check valve do.
No Corrosion Failures:  Because of their all plastic construction, these valves will never jam or stick as a result of rust or corrosion.  Also they will not contaminate sensitive fluids that come into contact with them.
Cost Effective Design:  Cepex Wafer Check Valves are the valves of choice for cost sensitive applications the require a full featured, no compromise valve.

 

Visit the Cepex Website